Mercury ELITE650 PRO Line Interactive UPS
$49.59
$95.71
Specifications Input voltage 220VAC Input frequency 50Hz Input phase Single phase Input socket With Fuse Cold Start (0 to 100% load) Press the ON/OFF switch Input range (220V) 140V-300V Rating output (VA). 650VA Rating output (W). 390W Rating output (W). Battery mode(simulated sine wave), AC mode (sine wave) Power factor 0.6 Rating voltage 220V Output range 220Vac-7% 15% ( in battary mode ) Rear Output Socket 2xUniversal – Battery backup Transfer time TYPICAL 4-8 ms Communication Interface NIL Rating frequency 50Hz Output Frequency Line-mode Synchronize with the Utility Battery mode 50 Hz±1Hz Output Frequency Line Mode Synchronize with the utility Short Circuit Protection Line Mode FUSE & firmware protection Battery Mode Software protection controlled by firmware Overload Protection Line Mode 110% -5% (Go to fault mode after 5 minutes), 120% -5% (Go to fault mode immediately) Battery Mode 110% -5% (Shutdown after 5 minutes) 120% -5% (Shut down immediately) Rating frequency 12V/8.2AH x 1 Backup Tim – Typical 10mins to 18mins (depending on load) Charge Current About 1A at normal mode Over Charge Protection >14.5V /- 0.2V stop charging <13.5V /- 0.5V Recharge Weight 5.6kg /- 0.3Kg Dimension 390x 145 x 220 (mm) Master Carton 45.5 x 40 x 23.5 (cm) (4pcs)
Ups