Description RO Booster Pump : It is a Diaphragm type water pump that acts mainly as an RO Booster Pump (water delivery pump into the RO Membrane filter) able to provide a good water flow rate according to the size of the membrane. Suitable for use in the household Small shopping malls with a high demand for water or buildings that are 2-3 stories high from the floor Our booster pumps can be used with high-pressure R.O. 400 GPD membrane filters. Product complete set with Adapter 220 V converted to 24 VDC 3.0 A This pump is capable of continuous and efficient operation for follow-up circulation applications as well. Ideal to work with hydraulic storage systems but also compatible with most hydraulic shut-off valves. This booster is suitable for 400 GPD water purifiers and reverse osmosis systems. Instructions for use: Requires proper power adapter The pump is prohibited from being directly through the raw water without pre-filtering, otherwise it will affect its service life. Pumping of corrosive liquids, alcohol, acid-base liquids, etc. The wiring is not divided into the positive and negative poles, and two wires can be connected at will. When installed inside the water purifier, tighten the screws to avoid resonance noise and try to keep enough for the heat dissipation pump. The pump should not run continuously for more than 4 hours. stop for 30 minutes for more than 4 hours The pump is not available for irrigation, solar, bathing, or pressure water heaters. Size 400 GPD Standard booster pump Use the water pump to enter the filter tank. Made of good quality stainless steel and the material on the pump body is high quality plastic. Resistant to heat, strong, meets the standards through the test of use.
